The Ecoflow Motoflow fuel saver magnetic is designed to condition the fuel prior to combustion to increase power output, save fuel, and reduce emissions.
The combustion process of fuel produces energy (heat & power), hydrocarbons (the unburned and waste fuel) and pollutant gases. Factors affecting the efficiency of combustion, and therefore the output of the engine or apparatus being fuelled, include the quality of the fuel, the quality of the air and the ratio of fuel to air.
In a similar way that water conditioned by heat (hot water) carries more energy and mixes with other substances more readily than cold water, fuel conditioned by a strong magnetic force carries more energy and mixes more readily with air resulting in a more complete combustion. i.e. more energy and less waste from the same amount of fuel.
This process is known as Ionisation by Magnetic Induction (IMI). The results of laboratory testing on petrol and diesel engines fitted with an Ecoflow fuel saver magnetic to confirm the positive benefits of financial savings, improved performance and dramatically reduced pollutant emissions being enjoyed by users world wide.
The outstanding success of Ecoflow® products when compared to other IMI products is attributable to the unique Central Reverse Polarity magnetic field designed and researched specially by Ecoflow. This field, applied to the fuel, promotes superior conditioning through increased electron agitation.
Most customers report fuel savings of between 5-20% for vehicles and up to 30% for heating boilers, a cleaner combustion area, and better performance.
The Ecoflow Motoflow® magnetic fuel conditioner(fuel saver magnetic) has been tested by laboratories world-wide, including the British government's Warren Springs Environmental Laboratory (DTI), where a 12,000 mile test showed improved fuel economy, increased power, and reduced emissions.
Ecoflow comments on Warren Springs test results (pdf 22k)
Sceptics may attempt to refute Ecoflow's performance claims for this product but the Motoflow's ability to simulate the pulsed magnetic field of an electro-magnet with patented CRP technology makes this product superior to other magnetic products.
The CRP configuration provides an additional 'kick' of three opposed directional forces and creates a field that is focused in one direction and shielded on the reverse, providing a concentrated, focused magnetic field. The magnetic properties are guaranteed for life.
Now fuel saver magnetic also developed for oil & gas heating boilers as well as most petrol and diesel engines, countless households, offices, factories, and councils are using Ecoflow® products to help reduce fuel consumption and maintenance costs.
Your questions answered - click here
| Key features: |
 easily fitted - no cutting of fuel lines |
| reduces fuel consumption |
| rapid payback improves power and torque |
| reduces emissions |
| extends life of catalytic converters |
| cleaner burn extends life of spark |
| transferable |
| fully guaranteed |
 Motoflow M2The Motoflow M2 is for all petrol & diesel engines, including fuel-injected systems. Secured to the fuel line bringing fuel to the engine, no pipe cutting or modification to manufactured parts. Engines up to 3 litres - One Motoflow M2Performace vehicles and engines over 3 litres - Two Motoflow M2 Motorbikes - One Motoflow M2 Manufactured in Neodymium 32 axially polarised CRP contained in a Hytel shell. Weight: 36 grams. Size: 35 x 28 x 13 mm |
| In all cases the device should be fitted to the fuel line from the tank as close to the carburettors or fuel distribution pump as possible. Where maximum performance is required then the units can be put on individual carburettors or the fuel rail with one unit per injector. |
Every Ecoflow product carries a 90 day money back guarantee. If you are not satisfied with the performance simply contact us for a full refund.
Ecoflow® fuel conditioners are guaranteed for 10 years against faulty parts or workmanship.
No comments:
Post a Comment